36" Black Base Traffic Cones

28" 10 lb traffic cone

Effective Black Base Traffic Cone Placement for Work Zone Safety

WorkzoneSupply Black Base Traffic Cone Placement According to MUTCD and Flagger Policies

Traffic cones are a common temporary traffic-control device used to guide road users and delineate work areas. For nighttime or low-light use, visibility depends on factors such as cone size, retroreflective bands, lighting, placement, and the requirements of the applicable traffic-control plan.

The Manual on Uniform Traffic Control Devices (MUTCD) provides specific guidelines for the placement of traffic cones in work zones. These guidelines are designed to maximize safety and minimize traffic disruptions.

MUTCD Guidelines for Black Base Traffic Cone Placement

  • Spacing: Device spacing depends on roadway speed, work-zone geometry, traffic-control plan, and applicable agency requirements.
  • Taper: Taper length is based on the type of taper, roadway speed, and lateral offset. Follow the current MUTCD formulas or tables and any state or project-specific requirements rather than using one fixed distance.
  • Height: Cone size requirements vary by roadway speed and application. Use the size required by the applicable MUTCD provision, traffic-control plan, or agency standard.
  • Nighttime use: Conspicuity requirements can include retroreflective bands or other treatments depending on the device, roadway, and application.

Acceptable Flagger Policies

Flagger policies vary from state to state, but there are some general guidelines that should be followed. Flaggers should:

  • Be properly trained and certified.
  • Wear high-visibility clothing and gear.
  • Use clear and concise hand signals to direct traffic.
  • Be aware of their surroundings and be prepared to react to unexpected situations.

Checking State Requirements for Black Base Traffic Cone Placement and Flagger Policies

The best way to check state requirements for traffic cone placement and flagger policies is to visit the website of your state’s department of transportation. Most state DOT websites have a dedicated section on work zone safety that includes information on traffic cone placement, flagger policies, and other relevant regulations.

WorkzoneSupply Black Base Traffic Cones

WorkZoneSupply black base cones are available in multiple sizes and configurations for different work-zone applications. Review the individual product specifications and applicable MUTCD, DOT, and project requirements to confirm the correct cone size and visibility treatment for the intended use.

Conclusion

By following MUTCD guidelines and acceptable flagger policies, you can help to ensure the safety of workers, pedestrians, and drivers in work zones. Workzone Supply black base cones are a durable and visible option for traffic cone placement in work zones.

Additional Tips for Traffic Cone Placement

  • Place cones in a straight line, parallel to the edge of the roadway.
  • Place cones in areas where they are clearly visible to drivers.
  • Use additional cones to mark any hazards in the work zone, such as potholes or uneven pavement.
  • Inspect cones regularly and replace any that are damaged or missing.

By following these tips, you can help to ensure that your traffic cones are effective in directing traffic and protecting workers and pedestrians in work zones.

[porto_best_selling_products view=”grid”]

home